The NorDig specifications cover three areas:

1.  NorDig specifications for Integrated Receiver Decoders and relevant parts of integrated digital TV-sets.
2.  NorDig specifications for the use of transmit parameters in NorDig compliant networks.
3.  NorDig Test specifications.

All specifications are based on DVB and the minimum performance sets that are specified for NorDig compliant networks. The use of the NorDig specifications is shown in the NorDig Migration Plan (also available on www.nordig.org) .

Status of specifications:

1: NorDig Unified Requirements for profiles Basic TV, Enhanced, Interactive and Internet Access, for Digital Integrated Receiver Decoders and relevant parts of Integrated Digital TV sets for use in cable, satellite, terrestrial and IP-based networks, version 2.0

Download:  NorDig Unified Specification ver 2.0   (.pdf  format)

This specification includes updates of the previous specifications; NorDig I and NorDig II. A separate Compliance list corresponds to the NorDig Unified specification. This specification is approved by NorDig.

2: NorDig Rules of Operation for NorDig I and II receiver networks, version 1.0

Download:  NorDig Rules of Operation Specification 1.0  (.pdf format)

3: NorDig Unified Test Specifications for SD and HD Level Integrated Receiver Decoders for use in cable, satellite, terrestrial and IP-based networks, version 2.0

Download:  NorDig Unified Test Specification Ver. 2.0.  (.pdf format)

This specification is approved by NorDig and covers all NorDig profiles.